If you’ve ever walked the floor of a high-precision manufacturing plant, you know how much a single measurement error can derail a production run. Last month, a customer of ours—let’s call him Jake, the quality manager at a small automotive parts fabricator—called in a panic. His 10-year-old Coordinate Measuring Machine (CMM) was spitting out inconsistent readings on a batch of brake caliper housings, and he couldn’t afford to scrap $80,000 worth of workpieces. I hopped in my truck, drove two hours to his shop, and found the root problem: his CMM’s controller was running on outdated software, and its probe stylus had worn thin from years of hard contact. Coordinate Measuring Machine

Jake’s initial thought was to scrap the whole machine and buy a new one. But after walking through the numbers together, we realized upgrading his existing CMM would cost less than a third of a new unit, and it would get him to the same accuracy and throughput he needed in half the time. Too many manufacturers see their CMM as a static purchase, a “set it and forget it” investment, but that’s a mistake. Like any piece of industrial equipment, a CMM evolves—your production needs change, new quality standards get adopted, and software and hardware components become obsolete. For a CMM to keep pulling its weight, it needs regular, targeted upgrades, not just annual calibration and maintenance.
Today, I want to walk you through how to upgrade a CMM the right way—from auditing your current machine to picking upgrades that fit your specific workflow, not just the flashiest new part. As someone who’s sold, serviced, and upgraded CMMs for 12 years, I’ve seen more good machines written off for no reason than I can count, and I want to help you avoid that.
The first step in any CMM upgrade project isn’t grabbing new parts or logging into your vendor’s website—it’s auditing where you are right now. Too often, customers come to us saying their machine is “slow” or “inaccurate,” and they ask us to fix those general issues, but they haven’t tracked where those problems actually show up. Let’s break this audit down into two parts: performance metrics and workflow needs.
First, pull your CMM’s historical data. Most modern CMM software logs every cycle, probe deflection, and measurement deviation over time. Over the last 12 months, how often has your machine reported a “probe error” mid-job? How long does it take to run a typical quality check for your top five workpieces? If you’re measuring automotive brake calipers, for example, a cycle time that used to take 15 minutes might now take 25 minutes because the old controller can’t process the point cloud data fast enough. That extra 10 minutes adds up over a 1,000-part production run to 160+ hours of lost throughput annually.
Next, measure accuracy against your current quality requirements. A lot of us think a CMM’s accuracy is fixed, but actually, it’s dependent on its software and the probes it’s using. If your company recently adopted the new ISO 10360-12 standard for CMM surface measurement, your old machine might not meet the new tolerance thresholds, even if it passed all the old tests. Bring in a third-party calibration expert to run a full accuracy check—they’ll use a certified gauge block to test linear error, probe repeatability, and volumetric accuracy, which is the big one for complex workpieces. If the audit shows your volumetric accuracy is 1.5 microns, but your new parts need 0.8 microns, you have a clear gap to address.
Finally, talk to your operators. I’ve never met a CMM operator who doesn’t have a laundry list of small frustrations that add up to big problems over time. Maybe the software is clunky, so they’re manually inputting data instead of pulling up pre-programmed inspection routines. Maybe the touch probe they’ve used for years only works for straight surfaces, so they have to switch to a slower scanning probe halfway through a workpiece. Those user experience gaps are often the easiest and most impactful upgrades to fix. We had a customer in the aerospace industry last year who upgraded his CMM’s HMI (human-machine interface) and cut operator training time in half, because the old screen was so hard to read in the shop floor’s fluorescent lighting that new hires would take three days to get up to speed.
Once you’ve finished your audit, you can start prioritizing upgrades—because not every upgrade is worth your time or money. I see too many customers splurge on a new scanning probe when the real problem is an outdated controller that can’t process the probe’s data fast enough, or vice versa. Let’s go through the most common, high-return CMM upgrades, ranked by how much they move the needle for most manufacturers.
The number one upgrade I recommend for almost every older CMM is a controller and software refresh. This is the backbone of your machine, and it’s the part that most often becomes obsolete first. A 10-year-old controller might not support new probe technology, or it might run on an operating system that no longer receives security updates, which is a big deal if you’re connecting your CMM to a centralized quality management system (QMS). Back in 2021, a automotive supplier we work with had their entire production run delayed for three days because their old CMM controller’s Windows XP OS crashed, and they had no way to recover their data. A $12,000 controller and software upgrade would have cost them a fraction of the $200,000 in lost revenue they took that weekend.
When you’re picking a new controller, don’t just go for the latest model—match it to your throughput needs. If you’re running small, batch production of simple parts, a mid-range controller is more than enough. If you’re measuring complex, high-volume parts like turbine blades, you’ll want a high-speed controller that can process tens of thousands of data points per second without lag. Also, make sure the software integrates with your existing systems. If you use Mastercam for programming, or a custom QMS for data tracking, confirm that the new CMM software can import your existing programs and export data directly to that tool. Jumping through hoops to transfer data between systems will erase any time savings from the new controller.
The second highest-return upgrade is a probe system upgrade. Probes get worn, outdated, or mismatched to your parts over time. A worn probe stylus will cause deflection errors—think of it like wearing glasses with scratched lenses: the scan will be blurry, and you’ll misread small features. If you’re using a single touch probe, switching to a scanning probe can cut inspection time by 50% or more, because it moves continuously across a part instead of stopping at individual points. We had a customer in the medical device space who upgraded from a touch probe to a 5-axis scanning probe on his CMM, and he was able to add two extra quality checks to his daily run without adding any overtime to his operators.
But here’s the thing: a new probe won’t help if your controller can’t support it. That’s why the controller/software upgrade comes first. If you’re on a tight budget, start with the controller, then upgrade the probe six months later once you’ve recouped some of the cost. Also, don’t overlook probe calibration hardware. If your calibration sphere is scratched or dirty, your probe readings will be off no matter how new the probe is. A $500 calibration sphere replacement is a tiny investment that will keep your new probe accurate.
Next up are hardware upgrades that address mechanical wear or improve throughput. For older CMMs, this often means updating the air bearing system or replacing worn linear scales. Air bearings are what let the CMM’s axis move smoothly across its guide rails, and if they get dirty or have a leak, they can cause vibration and reduce accuracy. Replacing air filters, topping up the air pressure, or repairing a worn air bearing can bring a 10-year-old CMM’s accuracy back to nearly factory specs, for a fraction of the cost of a new machine. Linear scales, which measure the CMM’s position as it moves, can also wear over time—upgrading to a newer, higher-resolution linear scale can improve measurement precision by 20% or more for complex parts.
For manufacturers dealing with throughput bottlenecks, a multi-sensor upgrade is another great option. If you’re only using your CMM for tactile measurements, adding a vision sensor or a laser scanner can expand its capabilities. A vision sensor can quickly measure flat, simple features like hole positions, while a laser scanner can capture 3D surface data for parts like injection-molded plastics, which are too flexible for traditional tactile probes. This means you don’t need a separate vision inspection machine in your shop—you can do both jobs on your upgraded CMM, saving floor space and reducing your capital equipment count.
Now, not every upgrade makes sense for every operation. I once talked to a small shop that does custom one-off metal parts, and they spent $15,000 upgrading their CMM to a high-speed scanning probe and new controller—for parts that only require 10 point measurements, no more. That was a waste of money. For low-volume, custom work, the best upgrade might just be a ergonomic HMI and a probe calibration station, so their operators are more comfortable and the machine is set up to run small batches quickly. For high-volume, precision manufacturing like aerospace or medical devices, investing in a volumetric accuracy upgrade and a multi-sensor probe system is the way to go.
One common mistake I see is thinking upgrades are too disruptive. A lot of operators are worried that shutting down their CMM for a week to install a new controller will bring production to a halt. But good upgrade projects can often be scheduled during planned downtime, and a reputable CMM vendor will handle the installation and calibration without disrupting your regular run. We usually schedule upgrades for long weekends, so a customer’s CMM is back up and running first thing Monday morning, with all their existing inspection programs working on the new software. The only disruption is a half-day of operator training, which we build into the project timeline.
Let me wrap this up with a quick story from Jake, the automotive quality manager I mentioned earlier. He decided to upgrade his 2014 CMM instead of buying new. We upgraded his controller, replaced his worn touch probe with a new scanning probe, and calibrated the air bearing system. Total cost was $24,000, compared to $80,000 for a new entry-level CMM. The first week after the upgrade, he ran a batch of 500 brake calipers, and his cycle time dropped from 22 minutes per part to 12. His accuracy went from 1.4 microns to 0.7, which is exactly what his new design required. He told me later that he saved over $50,000 in that first quarter alone, because he didn’t have to scrap any parts and his throughput went up enough to handle an extra customer contract.
Upgrading your CMM isn’t about chasing the latest gadget—it’s about getting more value from an asset you already have. It’s about fixing the gaps that are slowing you down or risking your quality, without the cost and downtime of a full replacement. If you’re noticing inconsistent readings, slow cycle times, or that your CMM can’t keep up with your current production demands, don’t write it off. Take the time to audit your machine, prioritize upgrades that fit your workflow, and partner with a vendor who will tailor the upgrade to your needs, not push you to buy more than you need.

If you’re ready to take the next step and see what upgrades would work for your CMM, we’re here to help. Our team works with manufacturers of all sizes, from small custom shops to large aerospace facilities, to build CMM upgrade plans that fit your budget and your goals. Don’t let an outdated CMM hold your quality or production back—reach out to us to start a conversation about how to get the most from your measurement equipment.
Measuring Machine References
- ASME B89.1.12, Coordinate Measuring Machines (CMMs) – Performance Evaluation
- ISO 10360-12:2019, Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 12: CMMs used for measuring surface topography
- VDI/VDE 2617 Part 6.1, Accuracy of coordinate measuring machines – Characteristics and their testing – Scanning probes for tactile measurement
- NIST Handbook 150, Precision Measurement and Calibration: Selected ASTM Standards on Gage Blocks and Length Measurement
Hermens Industrial Co., Ltd.
As one of the most professional coordinate measuring machine enterprises in China, we’re featured by quality products and low price. Please rest assured to buy cheap coordinate measuring machine in stock here and get quotation from our factory. We also accept customized orders.
Address: 9/59 Moo 14, Rachathewa , Bang Phli , Samut Prakan Province 10540
E-mail: liu_jincheng@hzhemen.com
WebSite: https://www.hermensindustrial.com/